Tag Archives: rhyminggaijin

JSD Labs: Panasonic GH5, Möller 32/2x Anamorphic, and the Beholder DS2A testing

Full stats:
Camera: Panasonic GH5, 60fps 4K, ISO 1600 mostly, SS 100 always. V-LOG, Firmware 2.0 with Anamorphic IS and IS lock.
Lens: Pentax Super Takumar 50mm 1.4, used at f/1.4 and f/2.0
Anamorphic: Möller 32/2x
0.5+ and 3.0+ diopters.
Filmed near Yokohama Station, Japan.

This ended up being a pretty epic combination. I’ve had the Beholder DS2A for a few weeks now, but I’ve been dealing with weather, flaky people, and health issues that have kept me from making this video. I hope to have a full review of the DS2A soon, but I have to focus on what I can for now.

First off, while the Möller and the Beholder make this video what it is, the D2S 5th axis arms and the new GH5 firmware make it epic. As for the D2S arms, I am still learning how to tweak them for various situations. It might not be down to calibration as much as it is preference and walking situation. I’ll try to have more on this when I do a full review. Overall, they DO make a big enough difference that makes them worth the money in my mind.

The new firmware brings us video IS lock. This is HUGE for gimbal and steadycam work. The difference is obvious, especially when using Dual IS lenses. I can actually use the Nocticron with this rig, but only with ETC turned on. I stuck with the 50mm so I could get a wider image. Also, it seems the 2.0 anamorphic IBIS makes a difference as well. I should do a comparison.

That said, this was shot using a 50mm lens (33mm HFOV with the anamorphic) and the walking shots are so damn smooth. I have never really even tried any gimbal work on something that tight or a lens setup this big. Now, to balance and support it properly I had to make a simple support rig. It’s made from that simple aluminum flash bar that is for sale everywhere and part of a telescope lens clamp to support the end. Using a washer, I got it nice and flat along the rig.

The only unfortunate result of this is that it makes the camera and lens sit a bit high. While I can get it perfectly balanced, occasionally sharp movements will cause some vertical wobble. I’m pretty sure I could get rid of this with some PID and settings tweaks, but I’m very happy with the base gimbal settings. As you can see in the photo, the angled motor arm makes this rig possible. I don’t think I could do the same setup on the non-angled DS2. It does make it a bit weird to balance, though. I’m still getting use to it. Balancing overall was super easy. When I added diopters to the front I could re-balance the rig in less than a minute. I did use Warp Stabilizer on a few wide shots, but I doubt you’ll be able to tell which ones.

Because of the difficulty of the rig, I decided to find a sweet spot and just stick with it. Really pushing that 1600 ISO on some of these, but It doesn’t bother me too much for night video. It’s mostly shot at f/1.4, but I think some of the super bright crowd shots are at f/2.0. The lens and the anamorphic were kept at infinity and diopters were added, except for two shots where I double focused to get beyond what the 0.5+ Tamron could reach. It wasn’t too bad. The bokeh in this video is superb, the flares hit just right, colors are mostly good. I am still learning how to deal with V-LOG, but you gotta take what you can get with this setup. Shooting at night left me locked at a shutter speed of 100 to prevent flicker. I think I want to invest in some light ND filters for night video eventually.

I need to super thank Matthew (rhyminggaijin) and Kahesi for helping me with this shoot. They did a great job and I’ll most likely work with them again in the future. (Their links are below)  I’m not sure why, but I’ve had a REALLY hard time getting people for my videos. Either people are too shy, flake out, or just never get back to me. It’s really hindering my production schedule. I’m getting tired of working around it.

Lastly, I ask for your patience as I have been dealing with some health issues this year that are the real reason for the lack of regular updates. I have so much on the shelf and so many projects that I’ve had to outright cancel. After this shoot I have been really struggling to get through the day. I’m hoping that my most recent hospital visit will be the start of getting this cleared up. I have so much I want to do…

ANYWAY! I was pretty happy with this video overall. I want to do more and eventually clean it up to a more professional look, or at least as close as this rig can get. Look forward to more!

Once again, thank you to:

Matthew:
https://www.instagram.com/rhyminggaijin/
https://www.youtube.com/user/Rhyminggaijin

Khaleesi:
https://www.instagram.com/sexy_beau_diamond_/
https://www.youtube.com/channel/UC3luSyBYkUcdVhExrpO6m4g